多路Marx并联高压脉冲电源研究

脉冲功率技术在工业和生物医学领域有着广泛的应用,很多应用场合要求输出数百安培的高压脉冲。固态Marx发生器虽已研究多年,但是被广泛采用直插封装的IGBT和MOSFET功率半导体开关管的额定电流通常都低于100 A,无法满足低阻抗负载的应用需求。为提高输出脉冲电流幅值,提出两种多路Marx发生器并联的脉冲电源的拓扑结构,第一种方案采用多路Marx发生器直接并联,第二种是共用一组充电开关管的多路Marx发生器并联。由FPGA提供充放电控制信号,采用串芯磁环隔离驱动方案实现带负压偏置的同步驱动,主电路选用开通速度快、通流能力强的IGBT为主开关的半桥式固态方波Marx电路。实验结果表明,6路16级Marx直接并联的脉冲发生器能输出重频100 Hz高压方波脉冲幅值可达10 kV,在30Ω负载侧输出峰值电流可达300 A,上升时间230 ns。共用充电开关管的6路4级Marx并联发生器在5Ω电阻负载上的输出电流峰值可达300 A,最大输出电流可达460 A,上升时间272 ns。表明多路Marx发生器并联可以有效地减小系统内阻,提高系统带载能力;改进后的并联方案实现大电流脉冲输出的同时,所采用的开关管数量减小近一半,提高了系统的抗干扰能力的同时,降低了脉冲电源的成本;且增加级间并联导线可进一步改善均流效果。     

某型电动飞机螺旋桨振动特性实验研究

某型电动飞机采用螺旋桨产生拉力,为了防止螺旋桨工作时共振,利用ES-2-150振动实验系统进行了两叶木质螺旋桨和碳纤维螺旋桨的振动特性实验,采用谐振搜索与驻留方法测量出木质螺旋桨的第一阶固有频率为36.07Hz,碳纤维螺旋桨的第一阶固有频率为73.58Hz。螺旋桨爬升状态转频为39Hz,这与木质螺旋桨的第一阶固有频率非常接近,导致木质螺旋桨在爬升状态出现比较严重的振动故障。因此,某型电动飞机最终选择两叶碳纤维螺旋桨作为其拉力产生装置。     

Dynamics of various waves in nonlinear Schrödinger equation with stimulated Raman scattering and quintic nonlinearity

Nonlinear Dynamics - In this work, we consider a nonlinear Schrödinger equation with stimulated Raman scattering and quintic nonlinearity, which works as a model for the propagation of...     

Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.     

Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range. Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation, noise control and one-way propagation.     

Separation,Quantification and Structural Study of (+)‐Catechin and (–)‐Epicatechin by Ion Mobility Mass Spectrometry Combined with Theoretical Algorithms

Two catechin epimers and their non‐covalent complexes with γ‐cyclodextrin were studied by using ion mobility coupled with mass spectrometry (IM‐MS). Rapid separation of complexes was achieved with the peak‐to‐peak resolution reaching 0.86 after optimization of IM condition. Collision cross section (CCS) was measured to explore the structural difference of complexes. A gap of 11.75 Ų between two complexes was found. Molecular modeling and theoretical CCS calculation were adopted to explain the measurement results. Two binding ways of both complexes were found and the calculated CCS corresponds accurately to the measured CCS. Quantification of catechins in mixtures was performed and the relative error was less than 15%, indicating the effectiveness of quantification by IM‐MS.     

新郑西亚斯东周玉器材料属性与加工工艺的科技分析

中国玉文化源远流长，治玉工艺经过各个时代的不断发展和完善，在一定程度上能反映古代社会生产力发展水平及文化、贸易、技术交流等信息。利用能量色散型X射线荧光光谱（EDXRF）、激光拉曼光谱（LRS）、超景深光学显微系统（OM）等分析技术，结合硅胶覆膜微痕复制技术，对河南省新郑西亚斯东周墓地出土的一批玉器进行科技分析。首先利用化学成分和物相结构分析技术确定了玉器材质的矿物属性，其次利用显微分析技术表征了玉器表面及穿孔内部和印模的加工痕迹，特别是阴刻纹饰和穿孔微痕特征，最后探讨了玉器样品的材料属性和加工工艺两者之间的联系。化学成分和物相结构分析结果表明，所分析的西亚斯东周玉器材质丰富，主要矿物组成有滑石、透闪石、水晶、云母等。玉器表面纹饰微痕特征分析表明，所分析玉器阴刻工艺采用了两种加工工具，分别是砣具和手持硬质工具。穿孔微痕分析特征表明，钻孔包括单面钻孔和双面/多面钻孔两种方式，钻孔工艺则有实心钻、管钻等。部分玉器钻孔形状和内部微痕特征表明，尽管均采用了实心钻工艺，但所采用的实心钻头在形状上存在差异，同时，也存在是否配合解玉砂进行钻孔的差异。不同材料属性的玉器采用了不同的加工工艺。滑石质玉器，莫氏硬度1，器型主要为玉片饰，其表面阴刻纹饰主要采用手持硬质工具进行刻画，钻孔主要采用了双面钻孔方式，并使用了实心钻头未添加解玉砂进行加工，钻头形状可能为圆锥状；云母质玉器，莫氏硬度2~3，器型主要为玉玦片饰，纹饰采用了砣具添加解玉砂的加工工艺，钻孔方式为单面钻孔，采用了管钻工艺。透闪石型玉器，莫氏硬度5~6，器型主要为玉片饰，表面纹饰采用砣具配合解玉砂砣刻，以双面钻孔的方式为主，钻孔工艺为实心钻头配合解玉砂工艺，钻头形状与滑石类样品一致，为圆锥状。水晶质玉器，莫氏硬度7，均为珠饰，表面无纹饰，钻孔方式为双面/多面钻孔，钻孔工艺为实心钻配合解玉砂工艺，且钻头可能为圆柱形。研究结果表明，玉器表面纹饰所采用的阴刻工艺和钻孔工艺，与玉器本身的材料属性、器型等存在密切关系。     

含酰胺结构超低膨胀聚酰亚胺薄膜的热膨胀行为

采用联苯二酐与3种含酰胺结构二胺制备了具有不同取代基团的聚酰胺-酰亚胺薄膜, 考察了酰胺结构对薄膜力学、 耐热及尺寸稳定性的影响, 研究了聚集态结构与薄膜热膨胀行为的关系和规律. 该系列薄膜具有超高强度和优异的耐热性能, 拉伸强度高达280.5 MPa, 玻璃化转变温度在389~409 ℃, 并在30~300 ℃温度范围内表现出超低负膨胀, 热膨胀系数(CTE, ppm/℃, 即10 ⁶ cm·cm ^-1·℃ ^-1)在-3.05~-1.74 ppm/℃之间. 聚集态分析结果表明, 酰胺结构使分子链间形成了强氢键相互作用, 分子链在薄膜面内方向高度有序取向, 并在膜厚方向堆积更为紧密, 使薄膜表现出热收缩现象. 通过不同体积大小的取代基团进一步调控分子链间相互作用及排列堆积, 可实现薄膜在高温下近乎零尺寸形变, 为设计制备超低膨胀聚合物基板材料提供了新思路.     

Ni单原子催化剂表面CO2电还原动力学的电化学谱学解析

针对Ni单原子催化剂表面的CO₂电还原反应(CO₂RR), 提出了以Ni为活性位点的“单中心”机理以及同时借助Ni位点还原和碳氮锚定位水解的“双功能”机理. 依据稳态极化的实验结果, 开展了CO₂RR的动力学解析与模型参数的敏感性分析; 借助暂态模型方程, 分别获取可表达CO₂RR线性与非线性频响特征的电化学阻抗谱(EIS)与总谐波失真(THD)谱. 研究结果表明, CO₂的溶解分压对CO₂RR活性影响最显著. 若CO₂RR遵循“单中心”机理, Ni位点COOH_ads的形成为速率控制步骤; 但若为“双功能”机理, 碳氮锚定位的水解与Ni位点的CO_2,ads还原同为速率控制步骤. EIS理论上可用于区分CO₂RR的“单中心”机理与“双功能”机理; 与之相比, THD谱在CO₂RR的机理识别中并无优势.